MTM Power at InnoTrans 2026 · Messe Berlin

Power supplies for systems that cannot afford to fail.

At InnoTrans, we present new products for railway vehicles and rail infrastructure — and take time for what matters: your application.

Schedule a meeting

Tue, Sep 22 – Fri, Sep 25, 2026 · Hall 17 · Booth 410

About MTM Power

Made in Germany. Not as an origin — as a decision.

Your name is on a system that has to run for twenty years. That is exactly the responsibility we build power supplies for: for 35 years, for railway and industry, developed and manufactured in the Schwarzatal valley in Thuringia, Germany.

We don't start with the catalog — we start with the application: What does the system have to deliver, and for how long? The answer shapes everything that follows. And your point of contact remains someone who understands your application, even years after delivery.

The historic MTM Power factory building in the Schwarzatal valley: brick facade with a yellow half-timbered tower and onion dome, a wooded hillside behind it
Our factory in the Schwarzatal valley, Thuringia
  • 1991 founded
  • 250 employees
  • >3,000 customers worldwide
  • 750,000 converters in railway service

Schedule a meeting

New Products

Four highlights, one commitment: powering systems that have to run for years, with an engineering standard that makes no compromises.

We are happy to walk you through further new products right at our booth (Hall 17, Booth 410).

  • DC/DC converters PURC60 S24 in open design and encapsulated PCMDS60 110S24U by MTM Power

    60 / 200 W DC/DC converter for wall mounting

    PURC60 / PCMDS60U-VTPURC200 / PCMDS200U-VT

    Specified today. Still there in 20 years.

    Input voltages
    14.4…154 VDC
    Output voltages
    5 V; 12 V; 15 V; 24 V48 V (200 W version only)
    Ambient temperature
    −40…+70 °C (+85 °C t ≤10 Min) (EN 50 155, OT4, ST1)
    Dimension L × W × H
    130 × 69 × 30 mm170 × 115 × 38 mm
    Efficiency
    ≥ 92 % @ 24 V
    Connection Type
    Connector Phoenix Combicon CC2,5/8-GF-5,08 P26THR
    Specialities
    Open / cast design · Ultra wide range input · Power Boost 150 %

    New to our portfolio

  • USB-C panel-mount outlet PS-USBC30 with two ports in a blue housing with a stainless-steel mounting nut

    15 / 30 W USB-C charger

    PS-USBC15 / PS-USBC30

    Charging power where passengers need it.

    Input voltages
    14.4…33.6 VDC
    Output voltages
    1 USB-C port 5 V / 3 A or 2 USB-C ports 5 V / 3 A
    Ambient temperature
    −25…+55 °C (EN 50 155, OT1)
    Efficiency
    ≥ 92 %
    Connection Type
    Input: Spring clamps (push-in CAGE CLAMP®)
    Specialities
    Active USB-C ports

    New to our portfolio · Coming soon: USB-C PD Charger 65 W

  • AC/DC power supplies PMAT60 S12 for PCB mounting and PCMAT60 S24 for chassis mounting

    60 W AC/DC power supply for railway applications

    PMAT60 / PCMAT60

    Performance without compromise.

    Input voltages
    90…264 VAC
    Output voltages
    5 V; 12 V; 15 V; 24 V (regulated)
    Specialities
    Thermoselective vacuum encapsulation technology – protected against moisture, conductive dust, shock, and vibration · PMAT60 for PCB mounting, PCMAT60 for chassis mounting · suitable for worldwide use
    Standards
    EN 50 155, EN 50121-3-2, EN 45545-2 · overvoltage category OVC III

    New as a version for railway applications

  • DC/DC converter PWRC650 in a blue housing with ventilation openings and push-in connection terminals

    650 W DC/DC converter

    PWRC650

    For the most demanding applications.

    Input voltages
    43.2…154 VDC
    Output voltages
    24 V
    Ambient temperature
    −40…+70 °C (+85 °C t ≤ 10 Min) (EN 50 155, OT4, ST1)
    Efficiency
    ≥ 94 %
    Connection Type
    Spring clamps (push-in CAGE CLAMP®)
    Specialities
    Power Boost 150 %

    New: Version as battery charger

Schedule a meeting

Co-exhibitor · MTM Power Group

Elsit: inductors from our own group.

Elsit manufactures inductive components — standard and custom. For more than 30 years, at its own factory in Gliwice, Poland.

As part of the MTM Power Group, the same standard applies there as in the Schwarzatal valley: joint development, one line of quality, worldwide sales. At the booth, you talk to one team — about power supplies and wound components.

Shared booth: Hall 17 · Booth 410

Five flat copper coils from Elsit production
Cylindrical copper coil on a bobbin Compact injector coil with plug contacts Coil with a black bobbin and connection terminals

Elsit

Schedule a meeting

Core Values

What you can build on.

  • Continuity

    As a principle. Not a promise.

    No surprise discontinuations. One decision — right for the long term. We think about your systems long after the invoice is paid.

  • Reliability

    Performance without compromise.

    Not a goal — a result. Every product is engineered to deliver dependable operation when it matters most.

  • Expertise

    Decades of experience.

    35 years of application knowledge help us solve complex challenges with confidence and precision.

Schedule a meeting

InnoTrans 2026 · Hall 17 · Booth 410

Schedule a meeting at our booth

Tell us who you are and when you will be in Berlin — we will get back to you with a proposed time.

Required fields

I am a …
My fair day

For example, topics you would like to discuss, or a preferred time.

We use your details solely to process your request and to contact you about it. Learn more in our Privacy Policy.